Welcome, visitor! Register Login

RSS Feed

How To Properly Maintain The Stainless Steel Floor Drain Of Stainless Steel Laundry Cabinet

$25,000,000.00

3333333
  • Street: Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China
  • City: Yuyao
  • State: Enugu
  • Country: China
  • Zip/Postal Code: 315450
  • Listed: July 17, 2019 6:11 am
  • Expires: July 16, 2020 6:11 am

Description

If the Stainless Steel Laundry Cabinet has been in use for a long time, it will be used to maintain the laundry cabinet to extend the life of the laundry cabinet. Then we will go to see how the floor drain of the laundry cabinet should be properly maintained.

1. When selecting “stainless steel floor drain”, you should know whether the water seal depth of the product reaches 50mm. At present, some floor drain seals on the market have a depth of only 10 to 20 mm, which cannot effectively block the odor of the sewer.

2, side wall type floor drain, with floor frame floor drain, closed type floor drain generally do not have water seal; anti-overflow floor drain, multi-channel floor drain most with water seal, the selection should be based on the manufacturer’s information to understand clearly. For drains without water seal, the depth of the drain seal should be no less than 50mm. This component can be configured by the floor drain manufacturer or by the construction unit where the floor drain is installed.

3. The “stainless steel floor drain” can be adjusted in height and height, and the height is not less than 35mm to ensure that the floor drain surface level and the ground level are the same after the ground decoration is completed. The waterproofing wing ring is designed to make the waterproof requirement of “stainless steel floor drain” installed on the floor. The “stainless steel floor drain” located in the underground garage car passage or the load-bearing place shall have the strength of the rafter to meet the corresponding load.

4. The structure of “stainless steel floor drain” with water seal should be reasonable and smooth, and the debris in the drainage should not be easily precipitated; the cross-sectional area of ​​each part should be larger than the cross-sectional area of ​​the discharge pipe, and the minimum net width of the cross section of the flow channel should not be less than 10mm.

information about Stainless Steel Laundry Cabinet : https://www.afastainlesskb.com/product/

48 total views, 1 today

  

Listing ID: 5015d2ebc12c44d1

Related Products

1111

3 points stainless steel kitchen cabinet product d...

₦30,000.00

295 total views, 2 today

555

Stainless Steel Kitchen Faucet Does Not Know How T...

$20,000.00

372 total views, 0 today

Sponsored Links

Leave a Reply

You must be logged in to inquire about this ad.

Facebook Friends

Sold Ads

Visit Us On TwitterVisit Us On Facebook