Escalator Manufacturer Share The Knowledge Of Which Elevators Are Unpopular
We all see a variety of escalators in the mall, then you have carefully understood such escalators, their structural characteristics and working principles do you know? Let’s take a look at the fujihd Escalator Manufacturer .
The escalator consists of a ladder (variable slat conveyor) and armrests on both sides (deformed belt conveyor). The main components are step, traction chain and sprocket, guide rail system, main drive system (including motor, reducer, brake and intermediate drive link, etc.) drive spindle, ladder tensioning device, armrest system, comb plate, escalator skeleton and Electrical systems, etc. The steps gradually form a step after the passengers move horizontally (convenient for the passengers to board the stairs); the steps near the entrance gradually disappear, and the steps are horizontally moved again. These movements are realized by walking the main and auxiliary wheels of the step along different step guides.
The core component of the escalator is two chains that circulate around two pairs of gears. At the top of the escalator, there is a motor that drives the drive gear to rotate the chain. A typical escalator uses a 100 hp engine to turn the gears. Both the engine and the chain system are mounted in a truss, which is a metal structure that extends between two floors.
Unlike a plane in which the conveyor moves, the chain moves a set of steps. The most interesting part of the escalator is how these steps move. The steps are always level as the chain moves. At the top and bottom of the escalator, the steps fold over each other to form a platform. This makes the upper and lower escalators easier.
Each step on the escalator has two sets of wheels that rotate along two separate tracks. The upper device (the wheel near the top of the step) is connected to the rotating chain and pulled by the drive gear at the top of the escalator. The wheels of the other groups simply slide along the track, following the first set of wheels.
The two tracks are spaced apart from one another so that each step is level. At the top and bottom of the escalator, the track is horizontal so that the steps are flattened. There is a series of grooves inside each step to connect the two steps before and after the flattening.
In addition to rotating the main chain ring, the electric motor in the escalator can also move the handrail. The armrest is just a rubber conveyor belt that circulates around a series of wheels. The conveyor belt is precisely configured to move exactly the same speed as the step, allowing the rider to feel smooth.
The escalator system does not raise people by dozens of floors like an elevator, but is ideal for providing short-distance transportation. This is because of the high load rate of the escalator. After the elevator is full, it must wait for it to reach the designated floor and return to the other person to get on the elevator. On the escalator, as long as one person reaches the upper level, it will make room for others.
information about Escalator Manufacturer : https://www.fujihd.net/escalators/
117 total views, 1 today
You must be logged in to inquire about this ad.
Information about the ad poster
- Listed by:fujiBlanche
- Member Since: November 22, 2018
Other items listed by fujiBlanche
- Elevator Factory Reminds You To Pay Attention To The Maintenance Of The Villa Elevator
- Elevator Manufacturers Share How To Deal With Elevator Failures
- Elevator Supplier Share Elevator Pads To Better Protect Elevators
- Elevator Supplier Share The Time Of The Ladder
- Elevator Factory Sharing Elevators Are Not Sealed
Popular Ads Overall
- Pride of Abia Shoes (925 views)
- Crayfish (671 views)
- SANTAL PLANTAIN FLOUR (606 views)
- Pride of Abia Shoes (493 views)
- Ankara bags (490 views)
- Pride of Abia Shoes (466 views)
- Brogues (442 views)
- High quality Plastic PVC Sheet (424 views)
- Men fashion (386 views)
- Stainless steel floor drain share worth recommending (278 views)